EasyManuals Logo

Allegion PegaSys User Manual

Allegion PegaSys
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
PegaSys Operating Modes 61
4 PegaSys Operating Modes
Ex works, the PegaSys Offline components are permanently configured for one of the following operating
modes:
§ "Teach in" PIN-Code basic operating mode without credentials with code entry via keypad (only for
door fittings with keypad).
§ "Teach in" (P 100) basic operating mode without software support with master credentials.
§ "'NetworkOnCard" (P 200 / P 300) operating mode with software support.
4.1 Applicable reading technologies:
The PegaSys Offline components support the following reading technologies for the credentials:
§ MIFARE Classic
§ MIFARE DESFire
§ LEGIC Prime
§ LEGIC Advant
§ Hitag1 (availability depends on the type of PegaSys Offline component)
4.2 Switchover to daylight saving time, leap year
The PegaSys Offline components automatically switch to daylight saving time and back. The switchover is
performed in acc. with EU directive 2000/84/EC.
The PegaSys Offline components also detect leap years automatically.
4.3 »Teach in« PIN Code operating mode
In the case of PegaSys Offline components for the »Teach in« PIN-Code operating mode, all settings are
configured by entering codes at the integrated keypad.
Properties:
§ The door fitting can recognize up to 100 codes.
§ Using programming codes, you can:
- teach-in or delete new codes.
- adjust the door open time.
§ Security: If an incorrect code is entered three times, the door fitting is blocked for an adjustable period.
§ PegaSys Offline component signals when the batteries are getting weaker.
§ Credential data and settings stored in the memory are retained when the batteries are changed.
You can find more details on PegaSys PIN-Code in a separate manual.
4.4 »Teach in« (P 100) operating mode
In the case of PegaSys Offline components for the »Teach in« (P 100) operating mode, all settings are
programmed by means of a master card.
Device properties:
§ PegaSys Offline can recognize up to 100 credentials.
§ A credential can be enrolled at any number of PegaSys Offline components.
§ No data is written to these credentials.
§ With the master card, you can:
- Enroll new credentials.
- Delete individual credentials.
- Delete all credentials.
- Adjust the 'door open' time.
§ PegaSys Offline component signals when the batteries are getting weaker.
§ Credential data and settings stored in the memory are retained when the batteries are changed.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allegion PegaSys and is the answer not in the manual?

Allegion PegaSys Specifications

General IconGeneral
BrandAllegion
ModelPegaSys
CategoryDoor locks
LanguageEnglish

Related product manuals