Electronic Door Fittings of the PegaSys Series 27
1.3.4 Battery change at door fitting
When inserting the battery, observe the correct polarity. An incorrectly inserted battery
can damage the device.
Battery change on the wide PegaSys door fitting
Insert the battery exchange tool and remove the
battery case.
Remove old batteries and insert new batteries in
accordance with the regulations.
Push the battery case back in until it clicks into
place.
Battery change at the tubular frame fitting
Insert the battery exchange tool and remove the
battery case.
Remove old batteries and insert new batteries in
accordance with the regulations.
Push the battery case back in until it clicks into
place.