4 1336 FORCE AC Drive User Manual
Pages 3–20 through 3–24
GPT information does not apply.
Page 5–31
Important note added to “Drive Link Baud Rate” description.
Important: If a v6.xx drive is added to the
drive link that has v5.xx or less, it will only
operate at 125k baud. If all drives on the
drive link are v6.xx, it can operate at 250k
and 500k baud.
Drive Link Baud Rate
[D2D Baud Rate]
Parameter Number 10
Parameter Type Sink
Display Units Kbaud
Drive Units None
Factory Default 0
Minimum Value 0
Maximum Value 2
This word parameter specifies the baud
rate used on the drive-to-drive link (CAN)
communication interface as follows:
00H = 125K baud
01H = 250K baud
02H = 500K baud
www.rockwellautomation.com
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Power, Control and Information Solutions Headquarters
Publication 1336 FORCE-5.12DU2 – February, 2007 P/N 74002-113-01 (03)
Supersedes 1336 FORCE-5.12DU2 dated February, 2006 Copyright © 2007 Rockwell Automation, Inc. All rights reserved. Printed in USA
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: support@drives.ra.rockwell.com, Online: www.ab.com/support/abdrives
To Next Page
Loading...
Need help?
General
