Allen-Bradley ControlLogix 1756 - Specifying SFC_ROUTINE Attributes

Publication 1756-RM084F-EN-P - July 2002
Entering Sequential Function Chart Logic 7-3
Specifying SFC_ROUTINE attributes
Where:
Item: Identifies:
Description
Provide information about the routine.
Specify:
Description := ” text ”
SheetSize
the size of the SFC. Select one of these options:
•
Letter (8.5x11in)
•
Legal (8.5x14in)
•
Tabloid (11x17in)
•
A4 (210x297mm)
•
A3 (297x420mm)
Specify:
SheetSize := option
SheetOrientation
the orientation of the SFC sheet. Select Portrait or Landscape.
Specify:
SheetOrientation := option
StepName
the prefix for the name of the step blocks within this SFC routine. RSLogix 5000 software
uses this prefix when it automatically generates an SFC_STEP tag.
Specify:
StepName := name
TransitionName
the prefix for the name of the transition blocks with this SFC routine. RSLogix 5000
software uses this prefix when it automatically generates a transition tag.
Specify:
TransitionName := name
ActionName
the prefix for the name of the action blocks in this SFC routine. RSLogix 5000 software
uses this prefix when it automatically generates an SFC_ACTION tag.
Specify:
ActionName := name
StopName
the prefix for the name of the stop blocks in this SFC routine. RSLogix 5000 software uses
this prefix when it automatically generates an SFC_STOP tag.
Specify:
StopName := name
Spare Allen-Bradley Parts