Publication 1756-RM084F-EN-P - July 2002
Importing and Exporting Files 1-3
If you import a project that has forces, the project defaults to Forces
Disabled, even if the project was exported with Forces Enabled.
For more information about the structure of the complete
import/export file, see:
Exporting a Complete
Project to a Text File
You can export the project to a text file. You can then use any text
editor to modify the project.
For information on: See chapter:
structuring a complete import/export file 2
creating a complete import/export file 3
entering logic 4
1. Select File → Save As.
2. Define the project.
Click Save.
Make sure the project you want to export is already open.
Specify the name of the text file.
Select the .L5K file format.
IMPORTANT
Any unsaved edits are automatically saved when you
OK the export operation.
Spare Allen-Bradley Parts
To Next Page
Loading...
Need help?
General
