1 Publication 1756-RM084F-EN-P - July 2002
Appendix
C
Import/Export Revision History
Introduction
This appendix contains a history of enhancements made to the
import/export utility since version 1.1 (major revision 1, minor
revision 1) that was included with RSLogix 5000 programming
software, version 8.0.
Backward Compatibility
The import/export utility supports backward compatibility for import
operations. This means that the RSLogix 5000 programming software
can import .L5K files that were generated by a previous version of the
programming software. In some cases, an older .L5K file might not
correctly import into newer version of the programming software. The
revision history in this appendix will list any conditions when
backward compatibility for an import operation does not work
as expected.
The import/export utility does not support backward compatibility for
export operations. This means that older version of the RSLogix 5000
programming software cannot read .L5K files that were created with
newer versions of the programming software.
For information about: See page:
backward compatibility C-1
import/export utility version 2.1
(RSLogix programming software version 10.0)
C-2
import/export utility version 2.0
(RSLogix programming software version 9.0)
C-4
motion changes to support the SERCOS protocol C-5
import/export utility version 1.1
(RSLogix programming software version 8.0)
C-9
Spare Allen-Bradley Parts
To Next Page
Loading...
