Allen-Bradley ControlLogix 1756 - Page 83

Publication 1756-RM084F-EN-P - July 2002
Entering Function Block Diagram Logic 5-13
D2SD
Operand := D2SD_01,
VisiblePins := “
ProgCommand, State0Perm, State1Perm, FB0, FB1, HandFB,
ProgProgReq, ProgOperReq, ProgOverrideReq, ProgHandReq, Out, Device0State,
Device1State, CommandStatus, FaultAlarm, ModeAlarm, ProgOper, Override,
Hand”
)
D3SD
Operand := D3SD_01,
VisiblePins := “
Prog0Command, Prog1Command, Prog2Command, State0Perm,
State1Perm, State2Perm, FB0, FB1, FB2, FB3, HandFB0, HandFB1, HandFB2,
ProgProgReq, ProgOperReq, ProgOverrideReq, ProgHandReq, Out0, Out1, Out2,
Device0State, Device1State, Device2State, Command0Status, Command1Status,
Command2Status, FaultAlarm, ModeAlarm, ProgOper, Override, Hand” )
DEDT
Operand := DEDT_01,
VisiblePins := “
In, Out ”,
Storage :=
array_name )
DEG
Operand := DEG_01,
VisiblePins := “
Source, Dest ”)
DERV
Operand := DERV_01,
VisiblePins := “
In, ByPass, Out ”)
DFF
Operand := DFF_01,
VisiblePins := “
D, Clear, Clock, Q, QNot ”)
DIV
Operand := DIV_01,
VisiblePins := “
SourceA, SourceB, Dest” )
ESEL
Operand := ESEL_01,
VisiblePins := “
In1, In2, In3, In4, In5, In6, ProgSelector, ProgProgReq,
ProgOperReq, ProgOverrideReq, Out, SelectedIn, ProgOper, Override
”)
EQU
Operand := EQU_01,
VisiblePins := “
SourceA, SourceB” )
FGEN
Operand := FGEN_01,
VisiblePins := “
In, Out ”,
X1 :=
array_name ,
X2 :=
array_name ,
Y2 :=
array_name ,
Y2 :=
array_name )
FRD
Operand := FRD_01,
VisiblePins := “
Source, Dest” )
GEQ
Operand := GEQ_01,
VisiblePins := “
SourceA, SourceB” )
GRT
Operand := GRT_01,
VisiblePins := “
SourceA, SourceB” )
HLL
Operand := HLL_01,
VisiblePins := “
In, Out, HighAlarm, LowAlarm ”)
Instruction: Default Operand and VisiblePins formats (components within the Block structure):
Spare Allen-Bradley Parts