240 Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Chapter 6 Configure and Start the Kinetix 5700 Drive System
The Motion Axis Parameters dialog box appears.
7. From the Parameter Group pull-down menu, choose Frequency
Control.
8. Set the FluxUp, SkipSpeed, VelocityDroop, RunBoost,
MaximumFrequency, MaximumVoltage and CurrentVectorLimit
attributes appropriate for your application.
See the corresponding section in Appendix E, beginning on page 405
,
for information and configuration examples regarding all of these topics.
9. Click OK.
To Next Page
Loading...
