Allen-Bradley PowerFlex 400 User Manual

3 Contactor Full Feature Bypass with Disconnect Package (Style B/N) 2-33
Rockwell Automation Publication 22C-IN002E-EN-P - November 2010
Figure 2.21 250…350 Hp, 460V AC Drives - NEMA/UL Type 1
97D01891
01
02 03 04 05 06 07 08 09
10
11
12 13 14 15 16 17 18 19
20
21
22 23 24 25 26 27 28 29
30
31
32 33 34 35 36 37 38 39
40
41
42
02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 01
DATEREV. BY ECN/CR. NO.
APPROVAL
DESIGN REVIEW
FOR MANUFACTURING
AS SHIPPED
AS COMMISSIONED
BYDATE
SH.NEXT NO.SH.
-
DWG.ENG.
TITLE
CHK. BY
NO.DATE DATE
DR. BY
DATE
THIS DRAWING IS THE PROPERTY OF ROCKWELL AUTOMATION, INC.
OR ITS SUBSIDIARIES AND MAY NOT BE COPIED, USED OR DISCLOSED FOR ANY
PURPOSE EXCEPT AS AUTHORIZED IN WRITING BY ROCKWELL AUTOMATION, INC.
11
INTER-CONNECT DRAWING (CIRCUIT BREAKER) PF400, 250-350HP/460VAC, NEMA1 STYLE B, FRAMES G & H, CONTROL
97D01891
REH/ACI 10/9/06
AWR/ACI 10/9/06
AWR/ACI 10/9/06
L3
INCOMING
3
f POWER
L2
L1
CONNECTIONS SUPPLIED BY CUSTOMER WILL REQUIRE MANUAL RESET. OPENING OF THE FREEZE/FIRE INTERLOCK
1
MAIN
CIRCUIT
BREAKER
T2T1 T3
G
3231 33 34 35 36 37 38 39
CUSTOMER TERMINALS
BC
BYPASS
RUN
PURGE
40
AUTO START
BYPASS
S TATU S
INTERLOCKS
FREEZW/FIRE
T1 T2 T3
MOTOR
R/L1
T/L3
S/L2
GP2P1
U/T1
POWERFLEX 400
W/T3
V/T2
SPEED REF. INPUT
0 TO +10VDC, 100KOHM
INPUT IMPEDANCE
2
+
SPEED REF. INPUT 4-20MA, 250 OHM
INPUT IMPEDANCE
+
2
PO38 [SPEED REFERENCE] =3 "ANALOG In2". WIRE TO ANALOG INPUT #2 AND CHANGE PARAMETER INPUT #1. IF 4-20mA SOURCE IS TO BE USED, COME FROM 0-10V SOURCE WIRED TO ANALOG WHEN IN "AUTO MODE" SPEED REFERENCE WILL
2
10V 20MA
RUN/FWD
FUNCTION LOSS
SOFTWARE ENABLE
DIGITAL INPUT 1 (PURGE)
DIGITAL COMMON
DIGITAL INPUT 2 (LOCAL)
DIGITAL INPUT 3 (CLEAR FAULT)
DIGITAL COMMON
DIGITAL INPUT 4 (COMM PORT)
1324 756 89
10V 20MA
CONTROL BOARD
AO2
10V 20MA
AO1 AI1
ANALOG COM. #1
ANALOG OUTPUT #2 (OUTPUT CURRENT 0-10V)
ANALOG OUTPUT #1 (FREQUENCY 0-10V)
ANALOG INPUT #1
+ 10VDC
+ 24VDC
ANALOG INPUT #2
#1 RELAY N.O. (READY/FAULT)
ANALOG COM #2
OPTO OUTPUT (AT FREQUENCY)
#1 RELAY COMMON
#1 RELAY N.C.
#2 RELAY N.O. (MOTOR RUNNING)
#2 RELAY COMMON
#2 RELAY N.C.
RJ-45 SHIELD
OPTO COMMON
151110 12 13 14 16 17 1918 20 R3R1 R2 R4 R5 R6
SRC
10V 20MA
AI2
SNK
DM1
CB1

Allen-Bradley PowerFlex 400 Specifications

General

Input Voltage	200-240VAC, 380-480VAC, 500-600VAC
Output Voltage	0-Input Voltage
Output Frequency	0-400 Hz
Communication	EtherNet/IP
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short Circuit
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5-95% non-condensing
Enclosure Rating	IP20
Horsepower	0.5-20 HP
Control Method	V/Hz, Sensorless Vector Control