Allen-Bradley PowerFlex 400 User Manual

3-14 3 Contactor Basic Bypass with Disconnect Package (Style C)
Rockwell Automation Publication 22C-IN002E-EN-P - November 2010
Figure 3.6 50…60 Hp, 460V AC Drives NEMA/UL Type 1
97D00713
01
02 03 04 05 06 07 08 09
10
11
12 13 14 15 16 17 18 19
20
21
22 23 24 25 26 27 28 29
30
31
32 33 34 35 36 37 38 39
40
41
42
02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 01
DATEREV. BY ECN/CR. NO.
A 11/1/07 AWR
APPROVAL
DESIGN REVIEW
FOR MANUFACTURING
AS SHIPPED
AS COMMISSIONED
BYDATE
SH.NEXT NO.SH.
-
DWG.ENG.
TITLE
CHK. BY
NO.DATE DATE
DR. BY
DATE
THIS DRAWING IS THE PROPERTY OF ROCKWELL AUTOMATION, INC.
OR ITS SUBSIDIARIES AND MAY NOT BE COPIED, USED OR DISCLOSED FOR ANY
PURPOSE EXCEPT AS AUTHORIZED IN WRITING BY ROCKWELL AUTOMATION, INC.
11
INTER-CONNECT DRAWING - PF400, STYLE C 50-60HP @ 460VAC
97D00713
JRF/ACI 4/8/04
JFH/ACI 4/8/04
4/8/04
CONNECTIONS SUPPLIED BY CUSTOMER FREEZE/FIRE STATUS INPUTS. DRIVE/BYPASS INPUT MAY ALSO BE USED FOR
T2T1 T32019 21 22 23 24
CUSTOMER TERMINALS
BC
BYPASS
RUN
T1 T2 T3
MOTOR
CR
ENABLE RELAY
DRIVE/BYPASS
24VAC
DRIVE/BYPASS ENABLE
IF THE "DRIVE/BYPASS ENABLE" RELAY,CR,IS USED RED JUMPERS "J1" AND "J2" MUST BE REMOVED
2
1
FROM "CR" RELAY.
2
1
DRIVE START/STOP
G
MOTOR
PROTECTOR
INCOMING
3
f POWER
L3L2L1
R/L1
T/L3
S/L2
P2P1
U/T1
POWERFLEX 400
W/T3
V/T2
SPEED REF. INPUT
0 TO +10VDC, 100KOHM
INPUT IMPEDANCE
+
3
SPEED REF. INPUT 4-20MA, 250 OHM
INPUT IMPEDANCE
+
3
COME FROM 0-10V SOURCE WIRED TO ANALOG INPUT #1. IF 4-20mA SOURCE IS TO BE USED, PO38 [SPEED REFERENCE] =3 "ANALOG In2". WIRE TO ANALOG INPUT #2 AND CHANGE PARAMETER WHEN IN "AUTO MODE" SPEED REFERENCE WILL
3
10V 20MA
RUN/FWD
FUNCTION LOSS
SOFTWARE ENABLE
DIGITAL INPUT 1 (PURGE)
DIGITAL COMMON
DIGITAL INPUT 2 (LOCAL)
DIGITAL INPUT 3 (CLEAR FAULT)
DIGITAL COMMON
DIGITAL INPUT 4 (COMM PORT)
1324 756 89
10V 20MA
CONTROL BOARD
AO2
10V 20MA
AO1 AI1
ANALOG COM. #1
ANALOG OUTPUT #2 (OUTPUTPUT CURRENT 0-10V)
ANALOG OUTPUT #1 (FREQUENCY 0-10V)
ANALOG INPUT #1
+ 10VDC
+ 24VDC
ANALOG INPUT #2
#1 RELAY N.O. (READY/FAULT)
ANALOG COM #2
OPTO OUTPUT (AT FREQUENCY)
#1 RELAY COMMON
#1 RELAY N.C.
#2 RELAY N.O. (MOTOR RUNNING)
#2 RELAY COMMON
#2 RELAY N.C.
RJ-45 SHIELD
OPTO COMMON
151110 12 13 14 16 17 1918 20 R3R1 R2 R4 R5 R6
SRC
10V 20MA
AI2
SNK
DM1
MP1
MG

Allen-Bradley PowerFlex 400 Specifications

General

Input Voltage	200-240VAC, 380-480VAC, 500-600VAC
Output Voltage	0-Input Voltage
Output Frequency	0-400 Hz
Communication	EtherNet/IP
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short Circuit
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5-95% non-condensing
Enclosure Rating	IP20
Horsepower	0.5-20 HP
Control Method	V/Hz, Sensorless Vector Control