© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT11-06-150R8
41
UniLinc PC Application (continued)
Editing a Cycle
Enabling or Disabling a Cycle
To enable or disable any of the cycle formula’s cycles, click the check box next to the cycle
number.
Changing a Cycle Name
a. To change a cycle name, right click on a cycle.
b. From the pop-up menu, click Rename.
c. In the Rename Cycle window, in the New cycle name: textbox, enter the name
of the cycle.
d. Click OK.
Moving a Cycle
To move a cycle up or down in the cycle list, first click the cycle to be moved. Click the
green up and down arrows to move the cycle.
Copying a Cycle
To copy a cycle, right click the cycle to be copied. From the pop-up window, click Copy.
Right click the cycle to be pasted over. From the pop-up window, click Paste Over.
Enabling, Disabling or Changing a Segment
To enable or disable any segment, first click the cycle to be edited. To enable or disable a
segment, click the check box next to the segment number.
Tumble Dryer
Washer-Extractor
To Next Page
Loading...
