Alliance Laundry Systems UniLinc - Network Commands

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
62
11-06-150R8
UniLinc PC Application (continued)
Network Commands
In the tree view, click the desired network controller and right-click the desired machine from the list
of machines within the network. The following options are available under the Network Commands
menu:
Collect Machine Data...
Collect data from the machine.
Collect Machine Cycle Set...
Collect the machine’s cycle set.
Collect Machine Service History...
Collect the machine’s service history.
Program Machine...
Download, edit and upload presets to the machine.
Change Machine Serial Number...
Change the machine serial number stored on the machine’s control.
Change Machine Model Number...
Change the model number stored on the machine’s control.
Change Network Node Number...
View and edit the node number of a machine on a network.
Change Machine Clock...
Change the machine’s clock.
Manual Programming...
Enable or disable manual programming.
Rapid Advance...
Rapid advance the control to a specific segment and step.
Reset to Factory Defaults...
Reset the control to the factory default settings.
Enable/Disable Machine Cycles...
Enable or disable specific cycles.
Insert Service Record...
Insert a service record.