© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT11-06-150R8
119
Network Setup – Getting Started
NOTE: This section provides an overview of network setup. For network setup details refer to the
instructions provided with the wired network kit NK220 or with the wireless network kits NK320
(Ethernet connection) or NK330 (USB connection).
1. Assign Each Machine a Unique Node Number
Using the UniLinc Software, assign a unique node number to each machine.
NOTE: Make sure the USB IR device is connected to the PC.
a. Under the Infrared menu, click Change Machine Node Number.... The Change network node
number window appears.
b. Enter the desired node number into the Node Number: textbox.
c. Aim the USB IR device at the machine’s control and click the Change button. The node
number is assigned to the machine.
2. Select the Network Type
a. In the tree sturcture, click My Network Controllers. Refer to Figure 1.
NOTE: If My Network Controllers is not available in the tree structure, under the Tools
menu, click Options. The Options window appears. In the Options window, under the
Application tab, click the Show empty ‘Network Controllers’ folder checkbox and then
click the OK button.
Figure 1
To Next Page
Loading...
