© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
76
11-06-150R8
PC to Control Infrared Communication (Continued)
Resetting the Control to the Factory Defaults
1. To reset the machine to the factory defaults, under the Infrared menu, click Reset to Factory
Defaults....
2. The Reset to factory defaults window opens.
3. Select one of the following options:
Reset all program settings
Reset global water level settings
Reset global water temperature settings
Reset global alarm parameter settings
Reset audio level settings
4. Click the Set button. The Reset to factory defaults window opens.
5. Click Send.
6. Align the window on the back of the infrared communication device with the infrared comm port
window on the machine’s control.
7. The factory default settings are sent to the control.
8. To close the Reset to factory defaults window, click the Close button.
Washer-Extractor
Tumble Dryer
To Next Page
Loading...
