Alliance Laundry Systems UniLinc - Edit Machine Cycles (Single Cycle) (Washer-Extractor Only); Moving a Segment in the Cycle; Re-Naming a Cycle; Turning a Cycle on or off

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT11-06-150R8
91
UniLinc PDA Application (Continued)
Edit Machine Cycles (Single Cycle) (Washer-Extractor Only)
1. To edit a cycle, from the Program Options menu, press Edit Machine Cycle. The Segments
screen appears.
Re-Naming a Cycle
To re-name the cycle, press ..., next to the cycle’s name. The cycle’s name is highlighted and the
PDA’s electronic keyboard appears. Using the PDA’s electronic keyboard, enter the desired name
of the cycle.
Turning a Cycle On or Off
If a cycle is currently on, to turn the cycle off, press Disable Cyc.. If a cycle is currently off, to
turn the cycle on, press Enable Cyc..
Moving a Segment in the Cycle
To move a segment up or down in the cycle, press a segment. Press Up or Down to move the
segment.
Turning a Segment Off
To turn a segment off, press and hold a segment until a pop-up window appears. From the pop-up
window, press Off.