© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
74
11-06-150R8
PC to Control Infrared Communication (Continued)
Enabling or Disabling Cycles
1. To enable or disable any of the machine's cycles, under the Infrared menu, click Enable/Disable
Machine Cycles....
2. The Enable/Disable Machine Cycles window opens.
3. Select the cycles to be sent to the machine by clicking in the checkbox next to the cycle’s name.
Cycles with a check will be enabled and cycles without a check will be disabled.
a. To select all of the cycles, click Check All Cycles. A check mark appears next to all of the
cycles.
b. To deselect all of the cycles, click Uncheck All Cycles. The check boxes next to the cycles
are empty.
4. Click the Set button. The Enable/disable machine cycles window opens.
5. Click Send.
6. Align the window on the back of the infrared communication device with the infrared comm port
window on the machine’s control.
7. The enabled/disabled cycle set information is sent to the machine.
8. To close the Enable/Disable Machine Cycles window, click the Close button.
To Next Page
Loading...
