Alliance Laundry Systems UniLinc - Editing Machine Cycles (Entire Cycle Set); Editing a Cycle; Moving a Cycle in the Cycle List; Turning a Cycle on or off

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
90
11-06-150R8
UniLinc PDA Application (Continued)
Editing Machine Cycles (Entire Cycle Set)
1. To edit a cycle, from the Program Options menu, press Edit Machine Cycle. The Program
Cycles or Segment screen appears.
Turning a Cycle On or Off
To turn a cycle on or off, press and hold a cycle number until a pop-up window appears.
From the pop-up window, press On or Off.
Moving a Cycle in the Cycle List
To move a cycle up or down in the cycle list, press a cycle number. Press Up or Down to move the
cycle.
Editing a Cycle
To edit a cycle or the global settings, press a cycle number or Globals. Press Edit. The Segments
or Global Settings screen appears. See the Edit Machine Cycles (Single Cycle) section for
information on editing a cycle. See the Edit Machine Cycles (Globals) for information on editing
the global settings.
2. Press Close.
Washer-Extractor
Tumble Dryer
Washer-Extractor
Tumble Dryer