DIP Switch/Harness Index Mismatch
Error
On power up the control reads the Temperature Index Harness
value and compares that with the value of switch 1, switch 2 and
switch 3 on the DIP switch configuration. If the result is an inva-
lid setup the control will not enter Idle mode and instead enter Er-
ror Mode. The control will ignore all user inputs and display an
error message. The machine must be powered down and the cor
-
rect temperature index harness must be installed and/or the DIP
switch configuration must be corrected.
Machine Errors
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
41
To Next Page