MMCR18 Media Converter Chassis Installation Guide
22
Setting up the Chassis
The MMCR18 chassis can be used on a desktop or mounted on a 19-inch
equipment rack.
To set up the chassis to install media converters, do the following steps:
1. “Reviewing Safety Precautions” on page 23
2. “Preparing the Site” on page 26
3. “Unpacking the Package Contents” on page 27
4. “Installing the Chassis on a Desktop” on page 30
5. “Installing the Power Supply Unit into the Chassis” on page 31
6. “Removing the Cover Plate from the Chassis” on page 33
7. Do one of the following steps:
To set up the chassis on a desktop, continue to Step 8.
To set up the chassis on an equipment rack, go to “Installing the
Chassis in a 19-inch Equipment Rack” on page 34.
8. “Installing a Media Converter in the Chassis” on page 36
9. Do one of the following steps for connecting the power supply:
For the AC power supply, “Powering on an AC-Powered Chassis”
on page 39.
For the DC power supply, “Wiring and Powering on a DC-Powered
Chassis” on page 40.
To Next Page
Loading...
Need help?
General