MMCR18 Media Converter Chassis Installation Guide
30
Installing the Chassis on a Desktop
To install the MMCR18 chassis on a desktop, perform the following
procedure:
1. Unpack all the items from the shipping container and store the
packaging material in a safe location.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the chassis on a level, secure surface.
3. Do not apply power at this time. Go to “Installing the Power Supply
Unit into the Chassis” on page 31.
To Next Page
Loading...