Hardware Reference 15
C613-03020-00 REV K
AT-TFTP Server
This section explains how to access and use the AT-TFTP Server. You can
transfer configuration files as well as download software upgrades with
AT-TFTP Server.
1. If AT-TFTP Server has not been installed, install it from the Documentation
and Tools CD-ROM shipped with your switch. You can also download it
from www.alliedtelesis.com/support/software/.
Select AT-TFTP Server from the Start > Programs > Allied Telesis >
AT-TFTP Server menu.
2. To set preferences for the AT-TFTP Server, select Options from the File
menu to display the Set Options dialog box.
• In the “Default file transfer directories” field, enter the directory that
AT-TFTP Server will read from or write to, for file requests that do not
include a directory specification. You can specify multiple directories,
separated by semi-colons (“;”).
• To prevent unauthorised access to private directories, enter a directory
in the “Restrict to directory” field. The AT-TFTP Server will only use the
specified directory, even if file requests explicitly reference other
directories. You can specify multiple directories, separated by semi-
colons (“;”).
• For added security, selecting the “Read only” option ensures that files
can be read from the PC but not written to the PC. If you wish to use the
PC to archive scripts created using the create config command, you
must enable the “Read Write” option.
To Next Page
Loading...
Need help?
General
