Allied Vision Alvium G1 - Page 109

Specifications
109Alvium G1 User Guide V1.7.0
Absolute QE
Diagrams will be added in a future version of this document.
Spectral response
Diagrams will be added in a future version of this document.
Power requirements 12 to 24 VDC
Power requirements (PoE) IEEE 802.3af
Power consumption (typical)
External power: 4.0 W at 12 VDC
Power over Ethernet: 4.6 W
Storage temperature -20 °C to +85 °C ambient temperature
Operating temperature
Hardware
option
Housing
2
Cooling area
3
Mainboard
4
G1 BL
No Mount
5
-20 °C to +65 °C -20 °C to +85 °C
-20 °C to +85 °CG1 BL
with mount
6
-20 °C to +65 °C -20 °C to +85 °C
Closed Housing -20 °C to +65 °C Not applicable
Relative humidity 0% to 80% (non-condensing)
Digital interface 1000BASE-T
Camera controls GenICam (GenICam Access)
2
Including the interface assembly for G1 BL models
3
See Heat dissipation for Alvium G1 BL on page 177 and Mounting the G1 BL interface unit on page 184.
4
Output by DeviceTemperature
5
Ensure that the sensor is operated in the temperature range specified by the manufacturer. For any
questions, please visit www.alliedvision.com/en/support.
Housing temperature applies to the interface unit only.
6
Temperature values must be observed for the housing and for the cooling areas.
Feature Specification
Table 45: Alvium G1-812 UV specifications (sheet 2 of 2)