Allied Vision Alvium G1 - Alvium G1 BL (Board Level) - more Flexibility

This document at a glance
17Alvium G1 User Guide V1.7.0
Alvium G1 BL (Board Level) - more flexibility
Hardware options for standard Alvium G1 Closed Housing cameras offer C-Mount,
CS-Mount, and S-Mount. You want to change the position of the GigE and I/O
connectors to expand the flexibility for your application? Or you want to mount
Alvium G1 cameras in a housing with your own lens mount?
Alvium G1 BL (Board Level) cameras are available as
• Alvium G1 BL C-Mount (CS-Mount or S-Mount correspondingly)
• Alvium G1 BL No Mount (sensor unit without a housing).
See Camera model naming on page 33 for details.
The sensor unit connects to the interface unit through 110 mm or
200 mm FPC cables as shown in Figure 1:
Contents in this user guide
• Compliance, safety, and intended use on page 36
• Specifications on page 48
• Installing the camera on page 174
• Camera interfaces on page 196.
Figure 1: Alvium G1 BL hardware options and components
Ordering Alvium G1 BL cameras
See the Alvium Modular Concept at www.alliedvision.com/en/
support/technical-documentation/alvium-gige-documentation.
Sensor unit: C-Mount Sensor unit: No Mount
Interface unit
FPC cable
FPC cable
i