Firmware update
214Alvium G1 User Guide V1.7.0
Please note
You should update firmware only to change camera functions or fix known issues.
Consider: Any firmware update may not only add new features to a camera or fix
known issues. It may also replace previous features or change camera
characteristics. See firmware release notes for details.
Firmware update with Vimba X
1. Download and install Vimba X.
The download includes Vimba X documentation.
2. Download the firmware (AVF file).
3. Connect your Alvium camera to the host.
4. Execute the installer of the firmware updater.
The Vimba X Firmware Updater window opens, displaying your camera and
the installed firmware version.
5. Continue with Updating the firmware on page 215.
Keep the camera connected
• Keep the camera and the computer running while you are executing a
firmware update.
• If the camera is powered down during firmware update, it may get into a
non-functional state. Recovery may not be possible.
Use only suitable firmware
If unsuitable firmware is used, the camera may get into a non-functional state.
• Only update to newer versions. Do not downgrade firmware to an older
version, unless this has been explicitly communicated.
• We recommend updating the firmware to the next increment version only.
Skipping versions may cause issues.
Downloads
• For Vimba X, see www.alliedvision.com/en/products/software/
vimba-x-sdk.
• For firmware updates, see www.alliedvision.com/en/support/firmware.
To Next Page
Loading...
