Compliance, safety, and intended use
39Alvium G1 User Guide V1.7.0
For customers in Canada
Closed Housing cameras only
This apparatus complies with the Class B limits for radio noise emissions set out in
the Radio Interference Regulations.
CAN ICES-3 (B) / NMB-3 (B)
Pour utilisateurs au Canada
Boîtier de caméra fermé (Closed Housing) seulement
Cet appareil est conforme aux normes classe B pour bruits radioélectriques,
spécifiées dans le Règlement sur le brouillage radioélectrique.
CAN ICES-3 (B) / NMB-3 (B)
Alvium G1 BL cameras
Alvium G1 BL cameras are unfinished devices that are not EMC compliant in
themselves. To meet EMC requirements, they must be appropriately housed in the
customer's device and under the customer's responsibility.
Avoid electromagnetic interferences
Interface cables, power cables, and I/O cables are sensitive to electromagnetic
interference.
• Use shielded cables only.
• We recommend using cables offered by Allied Vision.
• Avoid coiling.
• We recommend using GPIOs only in environments with low electromagnetic
interference.
Moreover, avoid unnecessary bending to prevent damage to the cables.
Requirements for EMC housings
For initial guidance on electromagnetic compatibility, see the Electromagnetic
Compatibility for Open Housing Alvium Cameras application note at
www.alliedvision.com/en/support/technical-documentation/
alvium-gige-documentation.
To Next Page
Loading...
