Firmware update
215Alvium G1 User Guide V1.7.0
Updating the firmware
1. Click Open to select the firmware for the update.
2. Select the firmware for the update from the drop-down menu.
3. Click Update cameras.
Screenshots
The following instruction shows the firmware update on a Linux system. On Linux
systems with other skins and on Windows, the GUI will look different.
The screenshots show an Alvium CSI-2 camera, but it applies to all interfaces.
Figure 80:
Figure 81: The camera and installed firmware are displayed
Figure 82: The firmware version is selected
Figure 83: The update is being prepared
3
To Next Page
Loading...
