Allied Vision Alvium G1 - Lens Mounts and Maximum Protrusion

Specifications
154Alvium G1 User Guide V1.7.0
Lens mounts and maximum protrusion
Figure 47 shows schematics for maximum protrusion of lenses, Table 70 shows
values for maximum protrusion.
No need to readjust lens mounts
Alvium G1 camera mounts are adjusted with high precision during manufacturing.
Construction ensures permanent accuracy without need to readjust.
Figure 47: Maximum protrusion C-Mount and CS-Mount (left); S-Mount (right)
NOTICE
Damage to sensor or optics by unsuitable lenses
The sensor, filter, or lens can be damaged if a lens exceeding maximum protrusion
is mounted to the camera.
• Use lenses with less than the allowed maximum protrusion, see Table 70.
• See Mounting the lens on page 186.
• For S-Mount lenses, see Mounting and focusing S-Mount lenses on page 187.
Mount Maximum protrusion
C-Mount 13.6 mm
CS-Mount 8.6 mm
S-Mount 11.0 mm
Table 70: Maximum protrusion for Alvium G1 cameras
Sensor
Electronics
ĨƌŽŶƚŇĂŶŐĞ
Lens mount
Maximum protrusion
A
Maximum protrusion
ΎKŶůLJĐŽůŽƌŵŽĚĞůƐĂƌĞĞƋƵŝƉƉĞĚǁŝƚŚĂŶ/ZĐƵƚĮůƚĞƌ
A
B
Sensor
C/CS-Mount S-Mount
Filter
*
ĨƌŽŶƚŇĂŶŐĞ
Lens mount