Performance and troubleshooting
227Alvium G1 User Guide V1.7.0
Value changes by feature interdependencies
The conversion between time and clock cycles affects control values. Features for
pixel format, bandwidth, ROI, exposure time, and triggering are related to each
other. Changing values for one feature can change values for another feature. For
example, frame rates can be reduced when
PixelFormat is changed subsequently.
Figure 92 shows the interdependencies.
Effects for the interdependent features
Changing one control's value affects other control's values, such as:
If:
Height value is changed.
Then: Other values may be affected, such as for
AcquisitionFrameRate and
ExposureTime.
We recommend you to consider:
• The more features you adjust, the more current values deviate from previously
set values.
• The same effects that apply to
ExposureTime, also apply to AutoExposure.
• To avoid readjustments, apply settings in the order shown in Figure 92.
Figure 92: Interdependencies between features
Set First
Set Last
PixelFormat
DeviceLi nkT hroughputLimit
ROI Seƫngs
ReverseX/Y
Binning Seƫngs
SensorBitDepth
BlackLevel
May interact
AcquisiƟonFrameRate
ExposureTime
AcquisiƟonFrameRate
ExposureTime
To Next Page
Loading...
