Document history and conventions
25Alvium G1 User Guide V1.7.0
Document history
Version Date Remarks
V1.7.0 2023-Oct-30 • Added data for the South Korean KC Safety
Certification in Compliance notifications on page
37.
• Added contents to avoid possible damage to the
sensor by ESD:
- Extended the note for ESD on page 43.
- Added a note in Sensor on page 46 in the
product safety chapter.
- Added a warning in Sensor damage by ESD
on page 175 in the installation chapter.
• Added G1-131m/c and 192m/c models (both are
coming soon) in Specifications on page 48 and in
Lenses: Focal length vs. field of view on page
161.
• In order to avoid misunderstandings, truncated
the name of the camera’s I/O connector to
TFM-105-02-L-D in G1 Closed Housing interface
back panel on page 198.
• Applied editorial changes.
V1.6.0 2023-Sep-18 • Added contents for Alvium G1 BL (Board Level)
in:
- This document at a glance on page 15,
- Camera model naming on page 33,
- Acronyms and terms on page 34,
- Compliance, safety, and intended use on
page 36,
- Technical data and drawings in Specifications
on page 48,
- Notes and instructions in Installing the
camera on page 174,
- Camera interfaces on page 196.
• Added notes against using external power and
PoE at the same time in Product safety on page
43, Powering up the camera on page 194.
• Applied editorial changes.
V1.5.4 2023-Aug-10 Increased mass by 5 g in G1 Closed Housing:
Dimensions and mass on page 143 to include
thermal compound.
Table 2: Document history
To Next Page
Loading...
