Specifications
65Alvium G1 User Guide V1.7.0
ROI frame rates
Values are based on the conditions defined in Specified values on page 53.
Image format
Width
[pixels]
Height
[pixels]
ROI area
[MP]
Frame rate [fps]
1
122 MByte/s 12 MByte/s
Full resolution 728 544 0.396 276.4/139.3/138.6 27.9/14.0/14.0
VGA 640 480 0.307 349.4/176.9/176.6 35.5/17.9/17.8
HVGA 480 320 0.154 615.0/335.7/332.3 62.9/34.1/34.0
QVGA 320 240 0.077 778.0/638.8/617.7 80.1/65.1/65.0
HQVGA 240 160 0.038 1058.4/1059.4/847.2 110.3/110.6/110.3
QQVGA 160 120 0.019 1291.0/1296.2/1037.6 135.8/136.3/136.0
Max. × half 728 272 0.198 502.1/254.2/252.6 51.3/25.8/25.7
Max. × min. 728 8 0.006 2423.5/1271.1/1247.9 277.4/139.5/139.2
Min. × max. 8 544 0.004 387.7/385.4/306.8 39.3/39.3/39.2
Min. × min. 8 8 64 P 3356.6/3463.1/2798.4 385.1/390.9/389.8
1
Mono8 or Bayer...8
(2)
at SensorBitDepth = 8-Bit
(3)
/
Mono10 or Bayer...10 at
SensorBitDepth = 10 -Bit /
Mono12 or Bayer...12 at
SensorBitDepth = 12-Bit
2
The three dots... represent the colors of a Bayer pixel format, such as in BayerRG8.
3
The SensorBitDepth value must be set separately from PixelFormat.
See Sensor ADC readout modes for maximum frame rates on page 54 for details.
Table 21: Alvium G1-040m/c ROI frame rates
To Next Page
Loading...
