Specifications
72Alvium G1 User Guide V1.7.0
Absolute QE, spectral response
Diagrams will be added in a future version of this document.
ROI frame rates
Values are based on the conditions defined in Specified values on page 53.
Image format
Width
[pixels]
Height
[pixels]
ROI area
[MP]
Frame rate [fps]
1
122 MByte/s 12 MByte/s
Full resolution,
SXGA
1280 1024 1.311 59 / 45.5 9 / 4
HD 720 1280 720 0.922 85.6 / 64.1 12.8 / 6
XGA 1024 768 0.786 80.4 / 75.3 15.1 / 7
SVGA 800 600 0.480 102.1 / 102.1 24.5 / 12.2
VGA 640 480 0.307 126.5 / 126.5 37.9 / 18.9
HVGA 480 320 0.154 185.4 / 185.4 74.1 / 37.0
QVGA 320 240 0.077 241.8 / 241.8 144.9 / 72.5
HQVGA 240 160 0.038 347.6 / 347.6 277.7 / 138.9
QQVGA 160 120 0.019 444.8 / 444.8 444.8 / 266.6
Max. × half 1280 512 0.655 118.9 / 89.0 17.8 / 8
Max. × min. 1280 8 0.010 2051.8 / 1536.7 307.4 / 153.7
Min. × max. 8 1024 0.008 59 / 59
Min. × min. 8 8 64 P 2051.8 / 2051.8
1
Mono8 or Bayer...8
(2)
at SensorBitDepth = 10-Bit /
Mono10 or Bayer...10 at
SensorBitDepth = 10 -Bit
2
The three dots... represent the colors of a Bayer pixel format, such as in BayerRG8.
Table 25: Alvium G1-131m/c ROI frame rates (calculated values)