Allied Vision Alvium G1 - Page 76

Specifications
76Alvium G1 User Guide V1.7.0
ROI frame rates
Values are based on the conditions defined in Specified values on page 53.
Image format
Width
[pixels]
Height
[pixels]
ROI area
[MP]
Frame rate [fps]
1
122 MByte/s 12 MByte/s
Full resolution 1456 1088 1.584 72.7/36.6/36.5 7.2/3.6/3.6
WXGA+ 1440 900 1.296 88.1/44.2/44.1 8.8/4.4/4.4
SXGA 1280 1024 1.311 87.6/43.9/43.9 8.7/4.4/4.4
HD 720 1280 720 0.922 121.7/61.1/61.0 12.2/6.1/6.1
XGA 1024 768 0.786 143.3/72.2/71.9 14.4/7.2/7.2
SVGA 800 600 0.480 229.8/115.5/115.0 23.2/11.6/11.6
VGA 640 480 0.307 348.8/176.6/176.2 35.5/17.9/17.8
HVGA 480 320 0.154 613.4/334.8/332.2 62.9/34.1/34.0
QVGA 320 240 0.077 775.4/636.7/615.6 80.1/65.1/65.0
HQVGA 240 160 0.038 1058.3/1059.4/843.3 110.3/110.6/110.3
QQVGA 160 120 0.019 1291.0/1296.2/1031.8 135.8/136.3/136.0
Max. × half 1456 544 0.792 137.9/69.6/69.4 13.9/7.0/7.0
Max. × min. 1456 8 0.012 1194.4/635.5/626.0 136.4/69.8/69.6
Min. × max. 8 1088 0.009 204.3/202.2/161.0 20.5/20.5/20.5
Min. × min. 8 8 64 P 3356.6/3463.1/2756.6 385.1/390.9/389.8
1
Mono8 or Bayer...8
(2)
at SensorBitDepth = 8-Bit
(3)
/
Mono10 or Bayer...10 at
SensorBitDepth = 10 -Bit /
Mono12 or Bayer...12 at
SensorBitDepth = 12-Bit
2
The three dots... represent the colors of a Bayer pixel format, such as in BayerRG8.
3
The SensorBitDepth value must be set separately from PixelFormat.
See Sensor ADC readout modes for maximum frame rates on page 54 for details.
Table 27: Alvium G1-158m/c ROI frame rates