Specifications
87Alvium G1 User Guide V1.7.0
ROI frame rates
Values are based on the conditions defined in Specified values on page 53.
Image format
Width
[pixels]
Height
[pixels]
ROI area
[MP]
Frame rate [fps]
1
122 MByte/s 12 MByte/s
Full resolution 1936 1216 2.354 49.3/24.8/24.8 4.9/2.9/2.4
Full HD 1920 1080 2.074 55.8/28.0/28.1 5.5/3.3/2.8
UXGA 1600 1200 1.920 60.4/30.4/30.4 6.0/3.6/3.0
WXGA+ 1440 900 1.296 88.4/44.5/44.5 8.8/5.3/4.4
SXGA 1280 1024 1.311 87.9/44.2/44.2 8.8/5.3/4.4
HD 720 1280 720 0.922 122.3/61.6/61.6 12.3/7.4/6.2
XGA 1024 768 0.786 144.0/72.7/72.6 14.4/8.7/7.3
SVGA 800 600 0.480 231.2/116.6/116.4 23.3/14.1/11.8
VGA 640 480 0.307 351.4/178.5/178.9 35.8/21.6/18.1
HVGA 480 320 0.154 619.9/340.2/339.4 63.6/41.5/34.7
QVGA 320 240 0.077 785.8/649.7/574.6 81.3/79.7/66.9
HQVGA 240 160 0.038 1077.8/972.8/796.3 112.4/136.2/114.6
QQVGA 160 120 0.019 1320.0/1199.1/983.6 139.0/169.1/142.6
Max. × half 1936 608 1.177 94.4/47.7/47.7 9.5/5.7/4.8
Max. × min. 1936 8 0.015 953.3/525.4/533.6 109.8/69.8/60.4
Min. × max. 8 1216 0.010 184.2/162.6/132.0 18.5/22.2/18.5
Min. × min. 8 8 64 P 3560.0/3437.4/2883.2 412.2/519.8/449.8
1
Mono8 or Bayer...8
(2)
at SensorBitDepth = 8-Bit
(3)
/
Mono10 or Bayer...10 at
SensorBitDepth = 10 -Bit /
Mono12 or Bayer...12 at
SensorBitDepth = 12-Bit
2
The three dots... represent the colors of a Bayer pixel format, such as in BayerRG8.
3
The SensorBitDepth value must be set separately from PixelFormat.
See Sensor ADC readout modes for maximum frame rates on page 54 for details.
Table 33: Alvium G1-240m/c ROI frame rates