Table of Contents
Opus Operator's Manual 1-3
Scope of This Manual
This operator's manual incorporates the following chapters:
Contains a general introduction to the system.
Contains explanations and directions concerning safety
measures for operating the system, international
standard compliance, classifications and labels.
Lists electrical, space and environmental requirements
for installation of the system.
Contains a detailed overview of the system and its
various sub-systems, including technical specifications
for the system and each of the applicators.
Describes the control and service panels, footswitch and
various connections to the system, and functional
indicators.
Explains how to operate the system, offering basic
information and common instructions for operation.
Specific operating instructions for each of the
applicators may be found in the appropriate chapter.
Provides a detailed review of how to maintain the
system.
Lists the system error messages that might appear
during operation, their probable causes and what
corrective actions to perform.
Provides information on how to order the system's
accessories.
Conditions under which the system should be operated.
Intended Use and Indications.
Applicator information and Clinical Guide.
Applicator information and Clinical Guide.
To Next Page
Loading...