Alma Opus - Electromagnetic Compatibility; Electromagnetic Emission

Opus Operator's Manual A-1
Electromagnetic Compatibility
A.1. Electromagnetic Emission
Guidance & Manufacturer Declaration
The system is intended for use in the electromagnetic environment specified in
Table A-1. The system customer or user should assure that that it is used in such
an environment.
Table A-1. Electromagnetic Emission
Emissions test
Compliance
Electromagnetic environment – guidance
RF emissions CISPR 11
Group (s) 1 and 2
The product must emit electro-magnetic energy
in order to perform its intended function. Nearby
electronic equipment may be affected.
RF emissions
Class A
The product is suitable for use in all
establishments other than domestic and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
CISPR 11
Harmonic emissions IEC 61000-3-2
Class A
Voltage fluctuations/ flicker emissions
IEC 61000-3-3
Complies
The EUT in operating mode belongs to equipment Group 2 - as per classification of standards
IEC 60601-1-2 / CISPR 11. The EUT in standby mode was tested according to equipment Group
1 limits- as per classification of standards IEC 60601-1-2 / CISPR 11