Maintenance
7-2 Opus Operator's Manual
7.3 Service Information
In communications with Alma Lasers authorized representatives regarding the
system, always include the part number and serial number indicated on the
identification label located on the system service panel.
Warning
Unauthorized servicing or modification of this system not described in this
manual may expose the operator or patient to potential high voltage hazards.
Improper use or adjustment of this system may invalidate the service warranty
agreement.
In communications with Alma Lasers authorized representatives regarding the
system, always include the part number and serial number indicated
on the identification label located on the system service panel.
Questions or problems should be referred to your Alma Lasers representative, or to
the Alma Lasers Service Centers at:
Alma Lasers Ltd.
18 Haharash St.,
Caesarea North Industrial Park,
3079895 Caesarea, Israel
Tel: (+972) 4-627-5357
Fax: (+972) 4-627-5368
Email: service@almalasers.co.il
Alma Lasers, Inc.
485 Half Day Road, Suite # 100
Buffalo Grove, IL 60089
Tel: 1-224-337-2000
Fax: 1-224-377-2050
Email: service@almalasers.com
Website: www.almalasers.com
7.4 Routine and Preventive Maintenance
The following routine maintenance procedures should be performed by the beauty
operator on a regular basis determined by the clinic protocol.
Warning
The system generates high voltages when powered up.
Always turn the system off and unplug the power cable before performing
maintenance procedures.
The interior of the system or its components may be serviced only by Alma
Lasers authorized technical personnel.
7.4.1 Cleaning the System
The outer surface of the system may be wiped clean with a soft cotton cloth
swabbed in 70% alcohol.
To Next Page
Loading...