What to do if Alma Opus handpiece is not recognized?
If your Alma Personal Care Products handpiece is not recognized, it might be because the connected applicator doesn't belong to your system. Try turning the system off, connecting a matching applicator, and resuming normal operation. If the problem continues, contact Alma Lasers Service.
How to fix Date Time Error on Alma Opus Personal Care Products?
If you're getting a Date Time Error on your Alma Personal Care Products device, it could be due to a software malfunction. You can try turning the system off, waiting one minute, and then restarting to resume normal operation. Should the issue persist, contact Alma Lasers Service.
What to do if Alma Personal Care Products shows RS232 WD Error?
If your Alma Personal Care Products device is showing an RS232 WD Error, it indicates an LCD communication error. First, turn the system off, wait a minute, and restart to see if normal operation resumes. If the problem persists, contact Alma Lasers Service.
General| Brand | Alma |
|---|---|
| Model | Opus |
| Category | Personal Care Products |
| Language | English |
Highlights the system's built-in preventive safety measures.
Lists essential safety precautions and cautions for system use.
Detailed instructions on how to use the system.
Procedure for activating RF energy emission.
Comprehensive steps for safely turning off the system.
Step-by-step guide for replacing system fuses.
Tables listing error messages, causes, and corrective actions.
Detailed steps for pre-treatment and treatment day for Opus Plasma.
Guidelines for patient care after Opus Plasma treatment.
Procedures for cleaning and sterilizing Colibri tips.
Practical aspects of operating and treating with the Colibri tip.
Step-by-step guide for performing treatments with the Colibri tip.
To Next Page