Safety
Opus Operator's Manual 2-5
2.4 System Labels and Icons
The following labels are adhered to the system:
Figure 2-1. System Identification Label
Fuse rating label – located near the fuse compartment and
identifies type of fuses that shall be used for replacement:
Grounded power cable warning label – located on the
bottom of the rear panel.
Electrical Requirement and Hazard label – located next
to the power cable connection port
WEEE separate collection and disposal symbol, located
near the identification label: at the end of useful life the
applicators are to be returned to the manufacturer for
appropriate processing and disposal.
Follow instructions for use
To Next Page
Loading...