Alphasmart NEO - Sending text when connected by a USB cable

12 Neo User’s Guide
Sending text to a computer
Sending text when connected by a USB cable
Sending text by means of a cable is quick and simple.
To send text to a computer:
1. On your computer, open the file to which you want to send the
text (it can be a new file or a file that already has text), and place
your cursor where you want the text to begin.
Note: AlphaSmart Manager must be closed. Otherwise, you won’t
be able to send text to the application on your computer.
2. Turn on your Neo and make sure you’re in the file you want to
send.
3. Connect your Neo to your computer as described in “Connecting
your Neo to a computer” on page 9.
4. Press
send. Neo displays a progress bar and a percentage of how
much text has transferred.
5. When the transfer is complete, simply unplug Neo from your
computer.
6. On your computer, save the file.
7. If you don’t want to keep the file on your Neo, press
clear file,
then press
Y for yes. If you do want to keep the file on Neo, then
do nothing.
You can send additional files from Neo while still attached to the
computer.
To switch between files while connected:
1. On your Neo, press
a-file 1 to go to File 1, a-file 2 to go to File 2,
and so forth.
2. Press
send.
3. Save the file on your computer.