hypercharger - Operation Instructions and Installation Guide
Hardware
Version 2-2
All rights reserved. The reproduction of this document, also partially, is allowed only with authorization by alpitronic Srl
Version History
Revision and extension to HY_225 and HY_300
Update SW and HW description
Update to hypercharger 3.0
Update to hypercharger V4
Corrections, word optimization, addition of chapter
8
- Changes and additions suggested by TÜV Süd
- Restructuring of the chapters
- Adding of chapters:
• 2.5
• 2.6
• 4.4
• 6
• 9
- Extended information in chapter:
• 2
• 4
• 8
• 11
• 12
- Correction/extension of:
• Figure 1
• Figure 2
• Figure 4
• Figure 6
• Figure 9
• Figure 13
• Figure 14
• Figure 37
• Figure 38
• Figure 40
• Table 1
• Table 5
• Table 6
• Table 11
• Table 12
• Table 13
• Table 14
• Table 17
• Table 26
- Update Declaration of Conformity
- Added Table 21 to conductor cross sections
- Maximum voltage CCS1 set to 600 V
- Cross references
Linguistic and formal revision
- Linguistic revision
- Adding of:
• Figure 34
- Correction/extension of:
• Figure 3
To Next Page
Loading...
Need help?
General
