All rights reserved. The reproduction of this document, also partially, is allowed only with authorization by alpitronic Srl
6.4.3. Connector damaged
Figure 71: Connector damaged
If this message appears, the operator is already informed about the defect and will correct
the fault as soon as possible. In the meantime, if possible, switch to another charging plug.
6.4.4. Communication error with vehicle
Figure 72: Communication error
When this error message appears, the vehicle was unable to establish a connection to the
charging station. Retry to start a charging session on the charger. It that won’t help, try to
drive the vehicle forward and backward a few meters to reset the charging technology and
wake it up from a possible standby.
To Next Page
Loading...
Need help?
General
