Alpitronic Hypercharger HYC 150 User Manual

hypercharger - Operation Instructions and Installation Guide
Hardware
Version 2-2
2 Product description
Page 41 of 105
All rights reserved. The reproduction of this document, also partially, is allowed only with authorization by alpitronic Srl
2.5.5. Display incl. RFID reader
The display module is equipped with an RFID reader.
Figure 28: Display module
The display has the following characteristics:
Parameters
Nominal value
Display diagonal
15,6”
Resolution
1,366 (H) x 768 (V) pixels
Brightness
1000 cd/m
2
Table 15: Display properties
The supported RFID standards are the following:
- NFCIP-1, NFCIP-2 protocol
- ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface
- NFC Forum T3T via host interface
- ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum
digitalprotocol T4T platform and ISO-DEP
- FeliCa PCD mode
- MIFARE Classic PCD encryption mechanism (MIFARE Classic 1K/4K)
- NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE
DESFire)
- ISO/IEC 15693/ICODE VCD mode

Alpitronic Hypercharger HYC 150 Specifications

General

Brand	Alpitronic
Model	Hypercharger HYC 150
Category	Battery Charger
Language	English