Product description
12
AMALOG BAH0017.6 08.19
3.1 Intended use
The control terminal is intended exclusively for conventional use as a display and monitoring device in
agricultural applications.
Intended use also includes observing all instructions in this operating manual.
Other uses to those specified above are forbidden and shall be considered as improper.
For any damage resulting from improper use
the operator bears the sole responsibility
AMAZONEN-WERKE accepts no liability.
3.2 CE marking
The CE marking (Fig. 2) signalises compliance
with the stipulations of the valid EU directives.
Fig. 2
Electrical equipment
Battery voltage: 12 V (volts)
To Next Page
Loading...
Need help?
General
