Layout and function
AMALOG BAH0017.6 08.19
13
4 Layout and function
The following section provides information on the structure of the control terminal and the functions of
the individual components.
The control terminal has 6-digit display (Fig. 3/1).
The control terminal is equipped with an
EEPROM (memory chip) for storing data.
The data are again available for the next use,
even after a long period of deactivation of the on-
board power supply.
Fig. 3
4.1 Operation with DMC Primera direct seed drills
The control terminal issues an alarm when the set minimum fertiliser quantity is reached in the fertilis-
er hopper.
4.2 Rotary cultivator operation
The control terminal monitors the function of the overload clutch.
Acoustic alarm in event of tool carrier standstill.
To Next Page
Loading...
