Amazone AmaLog+ - Worked Area; Displaying the Worked Part Area; Erasing the Part Area Memory; Display the Total Area

Work commencement
32
AMALOG BAH0017.6 08.19
7.2 Worked area
7.2.1 Displaying the worked part area
Press .
 Display (Fig. 24):
worked part area (e.g. 10.5 ha).
Fig. 24
7.2.2 Erasing the part area memory
1. Press and hold the button.
2. Press
.
 The part area memory is set to 0 [ha].
3. Press the button
 Back to the work display (Fig. 26).
7.2.3 Display the total area
1. Press the button twice.
 Display (Fig. 25):
total worked area (e.g. 105.1 ha).
Fig. 25
The data cannot be deleted.
2. Press
.
 Back to the work display (Fig. 26).