General safety instructions
AMALOG BAH0017.6 08.19
9
2.4 Safety-conscious working
Besides the safety information in this operating manual, the generally
applicable national workplace safety and accident prevention regula-
tions are binding.
2.5 Handling the product
Do not subject the control terminal to any mechanical vibrations or
impact.
Do not allow the control terminal to fall.
Do not touch the display of the control terminal with sharp objects, as
this could damage the display.
Protect the control terminal from wetness and moisture.
Do not place the control terminal near heat sources such as radiators
or ovens.
Never open the housing of the control terminal.
If repairs are necessary, contact a specialist workshop.
To Next Page
Loading...
