Amazone AmaLog+ - Work commencement

Work commencement
30
AMALOG BAH0017.6 08.19
7 Work commencement
1. Place machine in starting position (standstill).
Display at standstill:
Digit 1 (Fig. 22/1) shows the
travel speed (0 km/h).
Digit 2 (Fig. 22/2) shows
the tramline counter 4.
Fig. 22
2. Lower the correct track marker (see seed drill operating manual).
The tramline control can be coupled with the track marker control.
The tramline counter can continue counting when the track marker is
actuated.
3. Set the tramline counter (see Chap. „Setting the tramline counter“, Seite 31).
4. Delete the part area memory (see Chap. „Erasing the part area memory“, Seite 32).
It is not mandatory to delete the part area memory.
5. Start.