BAG0017.7 10.17
Keys blue ā machine data:
Display of the actual tank contents (litres).
Display of the actual forward speed (km/h).
Display of the application rate (l/min).
1. Selecting the tank filling level curve .
2. Alarm limit for residual amount in the tank.
3. Alarm limit minimum spray pressure.
4. Alarm limit maximum spray pressure.
5. Calibrating the fill level indicator.
6. Display digital-value for fill level (for service
staff only).
7. Calibration factor for A/D-transducer (for
service staff only).
8. Driving simulator.
9. Transfer rate of serial interface.
10. Pilot factor for the part width section control
11. Number of part width section switches
To Next Page
Loading...
