Version 1.4 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 23
Place the sensor in the pool or spa within 100 feet of the display console (Figure 36, reference A).
Avoid transmitting through solid earth or ground (Figure 36, reference B). Use a tether (string) to fix the
sensor in the pool or spa.
Place the console at least three feet away from computers, TVs, and wireless phones.
Avoid transmitting through solid metal barriers.
Figure 36
NOTE: The F007PF is designed to float. If the F007PF is used under a cover and the sensor is constantly
submerged, the additional pressure will lead to premature gasket failure. Moisture will enter the sensor
compartment and cause sensor failure.
Probed Thermometer (F007TP)
To Next Page
Loading...
Need help?
General
