Version 1.4 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 26
Probed Thermometer Installation
The remote probe sensors have many applications, including measuring inside/outside air temperature, water
temperature, soil or ground temperature and refrigerator / freezer temperatures.
Refrigerator/Freezer Mounting
The sensor includes a detachable suction cup that may be used to secure the remote sensor to the interior or
exterior surface of the refrigerator/freezer, as shown in Figure 40.
For better reception, we recommended installing the sensor to the outside of the refrigerator/freezer. If the
refrigerator/freezer is a metal box, the wireless signal cannot escape, and the sensors must be placed on the
outside.
Figure 40
To attach the suction cup to the remote sensor, reference Figure 41.
Locate the mounting hole on the back of the unit.
Press the suction cup into the mounting hole.
While applying pressure with your thumb, twist the suction cup until fully inserted.
Wet the back of the suction cup and apply to clean, smooth, flat surface.
To Next Page
Loading...
Need help?
General
